Panthera O - hr, alt, sunr, suns, kcal, st, km/mi

====Please use GARMIN EXPRESS to change the SETTTINGS instead of the Garmin Mobile app===== Panthera O is a watch face with nice, partly transparent, analog hour and minute hands. After movement also a seconds hand is displayed for 10 seconds (maximum duration: determined by Garmin). In addition, 4 so called info-circles show the following information: Top info-circle: - Actual distance in km’s or miles - Actual kcalories burnt - The cicular contrast color shows the progress of the kcalories burnt up to that moment vs. the to be burnt kcalories for you as person for a full day (based on the Mifflin-St.Jeor Formula (1990)); at a full circle, you reached your target kcal for that day. Left info-circle: - Actual amount of steps - % steps, i.e. actual amount of steps / your target amount of steps for that day. The latest is automatically calculated by Garmin or manually set by you through the settings of your watch. If Heart rate calculation is valid and available (i.e. your watch is equipped with integrated HR), then the % steps is replaced by your actual HR value in beats per minute (bpm). - The circular contrast color shows the progress of the actual steps vs. the target amount of steps for that day; at a full circle you reached your target steps for that day Bottom info-circle: - Icon for movement (Active-walking icon, Inactive- sitting person icon, Asleep- person in bed) - Duration for inactivity calculated by Garmin in hr: min OR Active indication if status switched to active OR asleep indication if status changed to sleeping. - When you enable 'altitude', the altitude replaces the above mentioned duration. - The circular contrast color shows the progress of activity. A full circle means you are active. A partly full circles shows the amount of inactivity…the emptier the circle the longer your inactivity period is. Right info-circle: - Date (with enlarged font for the day) - Time (either in 24hr or in 12 hr am/pm notation; with enlarged font for the minutes) - Indicator when alarm is set (4 curved lines - left below in info-circle) - The circular contrast color shows the battery percentage. A full circle means a full battery, etc.. Next to information in the info-circles, also information outside the info-circles is displayed: - Sunrise time (either in 24hr or in 12 hr am/pm notation): above the right info-circle; based on http://en.wikipedia.org/wiki/Sunrise_equation - Sunset time (either in 24hr or in 12 hr am/pm notation): below the right info-circle - Your latest measured longitude position on which the sunrise/sunset is based: above the left info-circle - Your latest measured latitude position on which the sunrise/sunset is based: below the left info-circle Remark: if the displayed position deviates a lot from your current position, you should either update this information by doing a GPS position measurement through the settings menu of your watch or conduct an activity in which GPS functionality is involved. Five icons can be displayed: - An icon for an active Bluetooth connection between watch and smartphone (or table) AND active Garmin Connect app on your smartphone (or tablet) - An icon for Sound ON - An icon for Vibration ON - An icon for Messages - (An icon when a clock alarm is set - is replaced in v1.4 by alarm indication in right-info circle) All the colours can be modified with the Gamin Connect app on your smartphone. It is possible the adapt: - The background color - The color of the font inside the info-circles - The color of the font outside the info-circles - The color of the icons - The color of the hour and minute hands - The inside color of the info-circles - The contrast color for showing progress of the info-circles - The height measurement can be enabled - Wide hands can be enabled I hope you enjoy it. For any remarks or suggestions, just write me an email. Kind regards, Rene

V1.68 Corrected GPS data and Sunrise and sunset times (permission required) V1.67 Was finally able to get the watchface running for the Fenix Series 5 (5s/5/5x)! BUT PLEASE USE GARMIN EXPRESS for changing the SETTINGS V1.66 Intermediate release in attempt to fix fenix series 5 (5/5S/5X) V1.65 Added wide hands selection possibility. Used latest SDK 2.2.5 V1.64 included Altitude again. Can be configured to be displayed in the info-circle at the bottom. Is default OFF. If the watchface doesn't run after enabling on your watch, then just remove the wachtface and re-install it again, then it will return to the default altitude measurement 'OFF', so can be normally used again (without this functionality). If such a stituation occurs write me a quick note, with your type of watch and leave this function at its default, i.e. OFF. V1.63 removed Altitude. seemed to cause some issues. V1.6 Added Altitude in bottom info-circle + alarm indication in right info-circle instead of below hands if applicable V1.5 Returned to previous app interface (from v1.3) because of some compatibility issues V1.4 Added Altitude in bottom info-circle + alarm indication in right info-circle instead of below hands if applicable + app optimization V1. 3 Optimzed App editor and reduced memory usage. Works fine on simulator. When errors are encountered. I would be greatfull to receive a log file. You could check in the GarminAppsLogs directory on your watch, and find a CIQ_LOG.txt there. This gives more information about why the watchface is crashing. Would be great if you could send it through the 'contact developer'. =================