Temperature Adjust

If you like this app and would like to make a small contribution for the time and effort to produce then I'd be very grateful, donations can be made via PayPal to [email protected] - Many Thanks. Temperature display that estimates an adjustment to compensate for the bias created by the wearers body heat. The adjusted value assumes the device is being worn and subjected to the surrounding air (not tucked under 3 woolly jumpers!) It is I think impossible to accurately create an adjusted value, there are too many variables and most the device does not have knowledge of, but in my limited testing it has returned quite sensible results and certainly closer to the actual ambient temperature than the sensor reading. The sensor reading is also shown since if you're not wearing it or you're in water then that would be the preferred reading. To set a custom adjustment press the Select key, use the up and down keys to select the adjustment direction (Lower or Higher), press the Select key to move the calculated temperature in the direction required, to exit press the back button. I don't have enough range of temperatures to really smooth out the algorithm so if any one wants to feed back some findings in more extreme conditions then please do let me know what the adjusted value reads against an accurate temperature reading but please remember to give the device at least 20 minutes in the environment to hit it's target and also don't cover it with sleeves or gloves while doing so. In no event will the author be liable to you or any third parties for any special, punitive, incidental, indirect or consequential damages of any kind, or any damages whatsoever, including, without limitation, those resulting from loss of use, data or profits, and on any theory of liability, arising out of or in connection with the use of this software.

1.0.1 Adjusted conversion (reading too low) based on feedback and further sampling 1.0.2 Rebuilt for Fenix 6 product range. 1.0.3 Further adjustment to temperature reading. 1.0.4 Include User Controlled adjustment. To set a custom adjustment press the Select key, use the up and down keys to select the adjustment direction (Lower or Higher), press the Select key to move the calculated temperature in the direction required, to exit press the back button. 1.0.5 Include support for Fenix 7 range 1.0.6 Add a simple glance 1.0.7 Further Device Support 1.08 Further Device Support and minor screen adjustments accordingly