HC Route Power Pacer Online

HC Route Power Pacer Online is a GPS route-tracking data field that brings paper elevation profiles and split-time targets from your bike stem onto your Edge. It matches GPS position against the route geometry to show the elevation profile, remaining distance, current/upcoming gradient, target power, messages, and ETA. Add split targets, aid-station reminders, notes, target-power sections, popups, sounds, and high/low power alerts anywhere on the route. Create routes with the free HCRPP Online Generator. Import a GPX or GPS activity FIT, trim or reverse the route, and configure messages, notifications, ETA, and Profile Power Overlay per course. ZWO workouts are supported. Select the start point and intensity, and the Generator converts the time-based workout into distance-based target-power sections using gradient and the ETA Power Model. Save favorite routes and workouts for outdoor training. Sending a package issues a four-digit Receive Number. In Connect IQ settings, select Download Slot, enter the number, then choose the course with Course Select. Each course can be up to 500 km. Four Edge slots hold up to four courses (2,000 km total at maximum length). The browser can save 10 courses and 10 ZWO workouts; courses can also be exported as JSON. Sequential GPS matching limits incorrect jumps on out-and-back, loop, or intersecting routes. After a deviation, the app searches again and recalculates progress from the rejoin point. Garmin Connect / Connect IQ settings show Slot 1–4 route names, Receive Status, and Last Transfer Result as read-only information after the Edge app runs and Garmin Connect synchronizes. Generator: https://hcrpp-online-api.t-toab1974.workers.dev/generator/ Manual: https://toab.lovestoblog.com/manual/HC_Route_Power_Pacer_Online_JP.html HP：TOAB Cycling　CONNECT IQ APPS https://toab.lovestoblog.com/index.html KEY FEATURES • GPX and GPS activity-FIT course import • ZWO outdoor-workout conversion • Route trimming and reversal • 500 km courses and four Edge slots • Distance-based target power, messages, popups, and sounds • High/low power alerts with HR/cadence conditions • Gradient profile plus FTP-colored or blue Profile Power Overlay • GPS tracking and route recovery • Average-pace or gradient/target-power ETA • 5/10/15/20/30 km and full-profile FULL/ZOOM views • Browser storage for 10 courses and 10 workouts BASIC USE 1. Import a GPX or activity FIT in the Generator. 2. Configure the route and events. Optionally import a ZWO and adjust its start point and intensity. 3. Select “Send to Edge,” then enter Download Slot and Receive Number in Connect IQ settings. 4. After download, use Course Select, add this data field to an activity profile, and ride. TRIAL AND PURCHASE All features can be tried for seven days from the first KiezelPay license check: https://kiezelpay.com/ Continued use requires a US$5 license. If the purchase code does not appear, check Garmin Connect Mobile and restart the Edge. If hard to see, temporarily use a single-field layout. Course reception and license checks require Edge communications. DATA HANDLING The original GPX/FIT is processed in your browser. Data is sent online only when “Send to Edge” is selected. The package contains the selected route, elevation, target power, messages, and settings. It is deleted after the server accepts the Edge completion receipt. If not received or confirmed, it is deleted within 30 days of upload. Browser-saved courses and workouts remain only in that browser and device. Clearing browser data removes them; export important courses as JSON. IMPORTANT • Add this data field to an activity-profile data screen. • Power features require a power meter. • HR/cadence conditions require compatible sensors or data. • Displayed values are riding aids, not guarantees. • This app does not replace Garmin navigation or turn-by-turn directions. • Always prioritize road conditions, laws, official instructions, and safety.

UPDATE HISTORY v3.3ap Regular / 2026-08-31 Changes since v3.3am: - Reordered settings: Slot 1-4 Route, Receive Status, Last Transfer Result, Course Select, Download Slot, Receive Number. - Removed the [Online Course] prefix from route-name and transfer-status rows; the three operation settings retain it. - Reduced side padding for the top DIST and PWR values to 2px, providing more display space. - Added Target Step Avg Power to Mini Field View: average measured power within the current target-power step, reset at each step boundary, including equal-target and Free steps. - Renamed Value Font to Top Field Font. Font options and saved settings remain unchanged. --- v3.3am Regular / 2026-08-29 - Added FULL / ZOOM confirmation when switching the elevation profile range. - Added read-only Receive Status, Last Transfer Result and Slot 1-4 Route to Garmin Connect / Connect IQ settings. - Reports transfer start, Edge save completion, server acknowledgement, errors and server-retained status. - Displays saved route names and EMPTY / INVALID / READ ERROR slot states. - Preserved route-specific shading, FTP colors, target power, notifications, ETA and route tracking. --- v3.3aj - Added per-route profile shading through the Online Generator, with FTP-based zone colors or a single-blue option. - Moved shading settings from the app to individual routes. Older routes without these settings default to Off; 0 W intervals are not shaded. - Target power, alerts, ETA and route tracking are unaffected. To enable shading on an existing route, select Enabled in the Generator and transfer it again. --- v3.3af - Initial Public Release Major changes from HC Route Power Pacer V2: - Released as a separate Online app. - Replaced manual course-data entry with online transfer using a four-digit Receive Number. - Added four Edge course slots, with separate active-course and download-destination settings. - Replaced activity-distance positioning with GPS-to-route matching. - Added route reacquisition after deviations and improved positioning on out-and-back, looped and intersecting routes. - Increased the maximum course distance from 200 km to 500 km. - Redesigned the Generator for GPX and activity FIT files containing GPS data. - Added route-section selection, direction reversal, and editing on the map and gradient profile. - Added direct adjustment of target-power segments and message positions on the map or profile. - Added browser storage for up to 10 editable courses, with JSON backup, restoration and re-editing. - Moved messages, target-power pop-ups, power alerts and ETA settings to individual courses. - Added Elapsed Avg ETA based on actual riding pace and Power Model ETA based on gradient and target power. - Added 5/10/15/20/30 km and full-course profile views, plus temporary full-course display by tapping. - Added Mini Field choices for ETA, elapsed time, power and distance, with automatic repositioning to avoid the route-position marker. - Added Key, Interval Alert and Failure sounds, and updated default target-power-change and high-power-alert sounds. - Added KiezelPay licensing with a seven-day trial. - Supports Edge 540, 550, 840, 850, 1040 and 1050. The V2 Draft display is not available in the Online version.