Dialistic (Singlesport) D (Pace wheel)

A powerful visual pacer that allows you to track up to three metrics simultaneously and also to store statistics on your performance to hone your training. You can choose any three from speed, power (requires power meter), cadence and heart rate. (In free mode, there are no statistics and the display is restricted to a single metric - heartrate.) Payment: https://www.gdcsoft.com/k/G/PaceWheelD Unlock instructions: https://www.gdcsoft.com/garmin/startPurchase/PaceWheel PREMIUM FEATURES Set pacing targets for any or all of: • Speed • Power (requires power meter) • Heart rate • Cadence • Display targets on startup • Show lap numbers with the choice for laps completed (starts at 0) or laps started (starts at 1) • Current, average and max values for all dials • Choose colour theme (black background, white background, monochrome black, monochrome white) • Customise colours for all display elements For each target set, configurable statistics are stored for: • Target used (for devices with more than 60KB runtime memory) • % of session for up to two of below, in or above target • % of each lap for up to two of below, in or above target • Graph of where you were below, in or above your target zone TARGETS:GENERAL Targets are a comma-separated list of values. • 180,210 sets target to a low of 180 and a high of 210 • 150 sets low target of 150 with no high target • Leave target value empty to use the dial as a simple meter with sport-specific limits TARGETS:CADENCE Units are simple numeric number of strides / cycles per minute as per your Garmin reported cadence. TARGETS : POWER Units are simple numeric number of watts as per your Garmin reported power. TARGETS : HEARTRATE Units are simple numeric number of beats per minute as per your Garmin reported heartrate. You can also specify heartrate as a zone by using "z[zone]", for example: • z3 sets low and high targets to the base and top of zone 3 • z3,z4 sets targets to base of zone 3 and top of zone 4 TARGETS : SPEED Value is expressed as a decimal with "." as the decimal separator. If you don't specify a unit, it will use your selected display unit. Valid units are; • "mph" for miles per hour • "kph" for kms per hour • "mps" for metres per second. For example; • 8mph sets low target to 8mph • 6mph,16kph sets low target to 6mph/9.6kph and high target to 10mph/16kph TARGETS : PACE Value is expressed in mm:ss or hh:mm:ss with ":" as the separator. If you don't specify a unit, it will use your selected display unit. Valid units are; • "/100m" for time to complete 100m • "/km" for time to complete one km • "/5km" for time to complete five kms • "/10km" for time to complete ten kms • "/100y" for time to complete 100yards. • "/M" for time to complete one mile • "/5M" for time to complete five miles • "/10M" for time to complete ten miles • "/half-marathon" for time to complete half-marathon • "/marathon" for time to complete marathon For example; • 3:30:00/marathon is a three-and-a-half-hour marathon • 4:30/km,5:00/km sets low to 4:30/km and high to 5:00/km AND FINALLY If you find you love it, please leave a favourable review here . If you encounter any problems or have any questions, please use "Contact Developer" link.

https://twitter.com/GdcSoft | https://www.facebook.com/GDCSoft | https://www.reddit.com/user/GDCSoft | https://www.gdcsoft.com/garmin 1.0.24,25 : New devices 1.0.23 : Descent G1 1.0.22 : Some refactoring. Also Instinct, Instinct2s. 1.0.21 : D2 AIR x10 1.0.20 : Epix 2nd Gen and Fenix 7 series 1.0.19 : Venu 2/2s (part 2) Icons. 1.0.18 : Venu 2/2s 1.0.17 : Better help URL. 1.0.16 : Enduro. 1.0.15 : Bug fix for premium data field init. 1.0.14 : Kiezel payment system 1.0.13 : VenuSq 1.0.12 : Fix OOM error on Venu. Add missing devices. If you find you love it, ⭐⭐⭐⭐⭐ are always welcome! If you encounter any problems or have any questions, please use "Contact Developer" link. Ask me questions on Twitter https://twitter.com/GdcSoft This is a Data Field, please read Garmin's instructions for your device to add it to a Data Screen and use it for an activity: https://www.google.com/?q=garmin.com:add+to+data+screen This datafield has been cloned to allow for more flexibility - you might want to save specific configurations for race or training, or simply to reduce the number of settings you have to scroll through to setup your dial. This is one of three singlesport versions - there is also a "multisport" version that has sport specific settings. A single activation code will work on all five products. Dialistic (Multisport) https://apps.garmin.com/en-US/apps/542d099f-4f5d-46af-8c71-11c17c4f2f1c Dialistic (Singlesport) A https://apps.garmin.com/en-US/apps/61f93b53-0fff-40db-89a5-ade7607d6fac Dialistic (Singlesport) B https://apps.garmin.com/en-US/apps/aeeb51ad-eb49-4c21-b75a-d00c58a17bef Dialistic (Singlesport) C https://apps.garmin.com/en-US/apps/ade74f3f-f2b6-4b17-88d4-e1283810b60d Dialistic (Singlesport) D https://apps.garmin.com/en-US/apps/c0dd4430-cb25-43f4-88db-f7ae5457c8b5 DON’T SEE YOUR DEVICE IN THE COMPATIBILITY LIST? Check here: https://apps.garmin.com/en-US/apps/dd02231a-5955-4032-9f23-580ac39c4e23