Glidator2

WARNING: The app is intended only as an in-flight aid and should not be used as a primary information source. If the app contains a barometric altimeter, it will not function in a pressurized aircraft and should not be used in a pressurized aircraft. ============================ Overview It shows altitude, GPS heading, as well as vertical and horizontal speeds. The app also supports activity recording, allowing pilots to save their flight sessions for later analysis. ============================ Credits This app is inspired by and based on the original Glidator app by Gaetan Marti (https://github.com/gaetanmarti/glidator) The source code of Glidator2 is accessible via github : https://github.com/tkobler/Glidator2.git ============================ Navigation: - Press the up or down key to cycle between FlyInstrumentView, PositionView, and TimeView. - Press the select key to start or resume recording a flight session. - Press the menu key to access the preferences menu and toggle audio feedback. - Press the back key to exit the app or access the quit menu (if recording) Recording: - Start recording by pressing the select key, indicated by a tone and vibration (if supported). - To stop, press the back key, then choose "Resume," "Save," or "Ignore" from the quit menu. Monitoring: - FlyInstrumentView provides real-time altitude, vario, speed, and heading. - PositionView shows a compass with GPS coordinates. - TimeView displays the current time and battery status. - Preferences: Enable or disable audio beeps for climbing via the preferences menu.