Specialized Turbo Levo Data Field

The Specialized Turbo Levo features all the hallmarks our mountain bikes are known for while streamlining Turbo technology integration to give you the power to ride more trails. With the Specialized Turbo Levo Data Field we offer you the opportunity to extend and customize your display. The Data Field displays Turbo Levo specific information ( bike state of charge and current assist mode ) for all full width display modes, as well as speed, distance, and total ascent when in full-screen mode on Edge displays. It also allows you to control and switch the Eco/Trail/Turbo assist modes wirelessly right from your touchscreen Edge device. Following your ride, Levo specific metrics are included in your downloaded activity file (*on all devices except Edge 520), so you can see your assist mode and battery level along with your other ride metrics like speed and power. === Key Features === * Displays Turbo Levo specific information ( bike state of charge and current assist mode ) * Works in all Data Field layout options * Also works with the ebike remote. The remote is available through Specialized retailers or garmin.com. === Touch Screen Edge Features === * Allows you to control and switch the Eco/Trail/Turbo assist modes wirelessly * Large +/- touch areas so you don’t have to hit a bullseye when trying to adjust your assist level * Use full width data field layout options to use the assist level control features * Shows only battery level in the smallest data field option (half the screen width in portrait or third of the screen in landscape) * Works in both portrait and landscape mode ========== Instructions ========== Please click on this link to download Levo Connect IQ instructions in German: http://ibd.specialized.com/media/whatsnew/Levo_ConnectIQ_Anleitung_Sept16.pdf Adding Specialized Data Field to an Activity Screen: From Home Screen 1) Select Settings (Tool Icon) 2) Select "Activity Profiles" (Ex. "Ride", "Train") 3) Select Specific Activity Profile 4) Select "Data Screens" 5) Select Screen (Ex. Screen 1, Screen 2, etc.) 6) Select Number of Data Fields on the screen (+/-) [Note: Best viewed with 1 field] 7) Select Check Mark when done 8) Select Data Field 9) Select Connect IQ 10) Select Specialized Data Field 11) Back out to home screen and start Activity ============= Remote Pairing ============= Pairing a LEVO: 1) Press and hold any two buttons for 3 seconds to enter search mode. 2) Hold the remote next to the ANT+ device (the LEVO). 3) Adjust the assist level to verify pairing. Searching for an already paired LEVO: 1) Press any button to trigger a search from sleep mode. Clearing the paired device: 1) Follow the instructions for pairing a remote to clear the pairing and pair to a new LEVO. ============== Data Field Pairing ============== Pairing a LEVO: 1) Open a data screen containing the data field. 2) Hold the Edge flat against the ANT+ device (the LEVO). 3) Wait for the display to show the battery or assist level. 4) The LEVO will now be saved and paired to the next time the data field is used. Searching for an already paired LEVO: 1) Opening a data screen containing the LEVO data field will start a search for the paired LEVO. Clearing the paired device: 1) Open the device settings for the data field in Garmin Express or Garmin Connect Mobile. 2) Set the device number to 0 to start a search for a new ANT+ LEVO device or enter the specific device number of the new LEVO to pair to it directly. or 1) Alternate pressing PLUS and MINUS until the initial pairing screen appears (*on Edge displays with touch screens) or 1) Power down the device, then turn it back on. After 10 seconds, the device will start looking for a new bike if it does not find a device it was previously paired with (*only supported on wearables).

======================================================================== Please leave your email when contacting us about issues so we can send a response back. ======================================================================== ======================================================================== This data field does not work with built in Edge eBike data fields. Unpair your LEVO from the sensor list before attempting to use this data field. ======================================================================== ============= Changes In 1.53: ============= - Includes support for Edge Explore, Edge 520 Plus, Bontrager Edge 1030, Forerunner 645/645 Music, and Fenix 5 Plus Series.