Oxygen Widget

With increasing elevation and decreasing pressure, amount of effective oxygen in the air descreasing too. On sea level there's about 20,9% of oxygen in the air. This widget will show you a percentage of oxygen in actual elevation, elevation and if you will have Tempe sensor connected, it will show the temperature too (use at your own risk). ========================================================== If you like it, you can support me with a small donation: https://bit.ly/2B8l289 ========================================================== Widget will show percentage from real maximmum value (for example 1000m = 18.4 = 88% from max) and real value of oxygen (max 20.9 at sea level). If you like, you can check the effective oxygen information on webpage http://www.higherpeak.com/altitudechart.html Temperature sensor support:not all devices are able to use internal or external sensor. If there is just one available, second choice is set to int.barometer. For example fenix3/3HR and D2Bravo have no support to use internal temperature sensor through Connect IQ apps. ========================================================== AMS elevation treshold settings by user: - untrained user - treshold 2500m.a.s.l. - trained user - treshold 3000m.a.s.l. ========================================================== Tested on fenix3, fenix5 Plus, fenix 6 Pro, vivoactive 4 - v4.1.0 - Support for Marq Commander and Adventurer, vivoactive 4/4s, Legacy Cpt.Marvel & First Avenger - v4.0.0 - Repaired code for correct cooperation with device unit settings - v3.8.0 - Updated code for new fenix6 devices, added Glance mode - v3.6.2 - Repaired code for fr945 - v3.6.0 - Added support for new compatible devices - v3.5.0 - Small translation changes - v3.4.0 - Added possibility to select trained/untrained user which changes AMS elevation treshold - v3.3.5 - Added possibility to select preferred temperature sensor (internal/external) for compatible devices - v3.3.0 - Added support for vivoactive3 (there is a pressure showed instead of Tempe data), source code edit (source/resource data) - v3.2.0 - Added support for new devices (D2 Charlie, fenix5s), source code edit - v3.1.0 - Added support for forerunner 935, fenix5, fenix5x, fenix Chronos - v3.0.0 - Added support for normative units (depends on device settings) - thanks to user Mrkleen for the tip - v2.4.0 - Code edit - v2.3.0 - Edited graphics - v2.2.0 - Added DE and PL lang support - v2.0.0 - Added graphics, added CZ and SK lang support + AMD warning in elevation above 3000m (Acute Mountain Disease) - v1.0.0 - English language only If you will need to show oxygen data in running activity, you can use configurable datafield: http://apps.garmin.com/en-US/apps/34ccba53-7347-4917-af57-3b7ee4a9f1d1

v4.1.0 - Support for Marq Commander and Adventurer, vivoactive 4/4s, Legacy Cpt.Marvel & First Avenger