Multi-Bezel Diver 2

For all chronograph diver enthusiasts, myself included, this is the 1st Garmin watchface featuring interchangeable bezel types. # Features * Analog time * 3 subdial layout * Left sub-dial configurable to: Heart rate as % of maximum Heart rate Battery % Today's step progress to goal % Today's activity minutes progress to goal % This week's activity minutes progress to goal % Current temperature * Date window * Configurable bezel type (Diver's, 0-24 scale, 0-100 scale, compass, tachometer) * Configurable hand color Color selection instructions: https://ko-fi.com/post/Entering-numerical-color-settings-I3I5N1TZJ * Arc can be set to be a move indicator, battery%, heart rate, heart rate as % of max, goal progress, body battery or stress indicator * Battery saving mode during sleeping hours * Anti-aliased graphics (if supported by watch model) * 64k color support for AMOLED displays * Burn-in safe, full screen, always on display for AMOLED displays * Option to hide subdials or show only in high power mode NOTE: When the sub-dial reads 0% or a very small value, a black circle appears in the center of the dial hand (like a zero). This is to distinguish it from a 100% reading. # PRO Version features * Configurable face, daytime lume, second hand & bezel colors * All subdials can be configurable * Additional selections for subdials: Today's active calories burned progress to goal % Distance run/walked Floors climbed Meters (or feet) climbed METs (Metabolic Equivalent of Task) (during an activity) MET·h today MET·h/week Recovery time (hours) Body battery Stress level Estimated core body temperature Feels like temperature Probability of precipitation Sea level barometric pressure [kPa] Altitude 2nd time zone or UTC time Internal temperature NOTE: Not all selections are available on all watch models depending on hardware support * Directional heading compass indicator (when a GPS signal is available) * Configurable subdial pointer color * GMT/alternate time zone pointer (or hand) with configurable color, 12 or 24 hour scale (for 12 hour scale filled triangle indicates PM) * Chronometer (stopwatch or timer) function * Features requiring Connect IQ version 4.2.1 or higher: 1) Option to automatically display the (rotating) compass bezel when GPS is active. 2) Worldtimer bezel selection. Configurable time zone names and daylight savings for each time zone 3) Automatically rotates diver's bezel to align 0 with the minute hand when the chronograph is started. 4) Option to rotate the GMT bezel 5) Option to use GMT bezel + 24h hand to show chronometer elapsed time * Solar disc bezel option showing sunset, sunrise, nautical dawn & dusk, & 24h time pointer * Subdials can be turned off, on or on only in high power mode * 12 o'clock marker can be used as a bluetooth, GPS signal, messages, low battery or PM indicator * Sunrise and sunset time markers on the dial * Night lume mode with selectable activation mode and color * Chronograph reset emulation: (shows second hand in 0 position in low power mode) * Custom brand text instead of logo * Semi-transparent hand center option (for devices with Connect IQ 4.0.0 higher system software) * Always on second hand option (for Forerunner 255 and 955 series, Legacy Saga and Legacy Hero series, Vivoactive 4/4S and Fenix 7/7S/7X models only) * Bonus: replica mode # Payment For the PRO version, use this link to pay €3.35 via Stripe (no account required; credit card, Apple Pay, Google Pay accepted). https://buy.stripe.com/00w6oIeY03C28B1ez4f3c3Y Alternative payment via Paypal: https://www.paypal.com/paypalme/trudelta/3.35EUR Important instructions to get your unlock code quickly: https://ko-fi.com/post/Payments-via-PayPal-Z8Z6AIK78 If you don't get a reply within 8 hours, see here for help: https://ko-fi.com/post/Common-causes-for-not-receiving-your-unlock-code-N4N8BUEG

Version 2.21.0 PRO Version only change: Displayed colored progress arc on the 0-100 scale bezel when this bezel is enabled. Version 2.20.0 PRO version only change: Added option to align the worldtimer bezel to a fixed 0-23 bezel. This is intended for use with Garmin models with fixed 0-23 bezel markings like the Marq Aviator, D2 Air and D2 Mach. Only the time zone names are shown. The hour is read off by looking across to the 0-23 hour markings. Therefore the time zone names will rotate around the dial as time progresses instead of the local time zone being fixed to the top of the dial. See: https://ko-fi.com/post/Worldtimer-Designs-Updated-with-Option-for-Fixed-0-H1C420WOQM Version 2.19.0 PRO version only change: Changed the time zone names setting for the worldtimer bezel to accept either 3 or 4 letter names (for ICAO airport codes). For details, see: https://ko-fi.com/post/Worldtimer-Bezels-Now-Customizable-to-4-Letter-ICA-O1J120UAQ3 Version 2.18.0 PRO version only changes: Added windspeed and wind bearing to subdial selections. Added units selection setting for windspeed. Version 2.17.0 Added bezel rotation and worldtimer bezel features to the Forerunner 70. Version 2.16.7 Added support for the Forerunner 70 and 170 models. Version 2.16.6 Added support for the D2 Mach 2 Pro. Version 2.16.5 Expanded language support. Version 2.16.3, 2.16.4 Added support for the D2 Mach 2. Version 2.16.2 Added support for Venu 4 models. Version 2.16.1 Added support for the Fenix 8 PRO. Version 2.16.0 Added bezel rotation features to Forerunner 165, Descent G2 and Instinct 3 AMOLED models. Added worldtimer bezel option to the Forerunner 165 models. Version 2.15.1 Added support for Forerunner 570/970 models. Version 2.15.0 PRO Version only change: Added a Post-dive 24hr bezel option. For details, see: https://ko-fi.com/post/New-Post-Dive-24hr-Timer-Bezel-on-Multi-Bezel-Dive-Q5Q11DGHQD Version 2.14.0 PRO Version only change: Added missing bezel rotation features to Forerunner 255 models. Version 2.13.1 Added support for the Vivoactive 6. Version 2.13.0 PRO Version only change: Reduced battery consumption. Attempt to fix possible sunrise/sunset times from not updating. Version 2.12.0 PRO Version only change: Added the ability to start, stop and reset the chronograph using a press and hold action on the touchscreen. The chronograph must be displayed on the subdials or the main dial for this feature. For supported Garmin models, see: https://ko-fi.com/post/Garmin-Models-with-Press-and-Hold-Input-Capability-B0B01C98HA Version 2.11.0 PRO Version only change: When the bezel is set to diver bezel, allowed the bezel 0 to be re-aligned to the current minute hand position (via the menu) while the stopwatch continues counting from the original start time. This allows secondary steps to be timed while keeping track of a total time. This is a diver's chrono inspired feature. For details, see: https://ko-fi.com/post/Fun-with-Diver-Chronograph-Inspired-Timing-Feature-I2I41C78UN Version 2.10.0 Added support for Approach S50/S44 models. Added back possibly missing functionality on 390x390 pixel display models. Version 2.9.1, 2.9.2 Added support for Forerunner 165 series and 218x218 pixel display models. Version 2.9.0 PRO version only change: Changed rotation of the bezel to mark chronograph start/end time to account for fractional minutes. Version 2.8.1 PRO version only change: Improved image quality of the countdown bezel. Version 2.8.0 Removed support for Enduro. PRO Version only changes: Added auto rotating compass bezel and rotatable 0-24 GMT bezel capabilities to Venu Square 2, Forerunner 255, Venu 2 series, Vivoactive 5 and D2 Air X10. Added timer mode to chronograph function, plus corresponding on-watch, watchface settings menu to control the timer. Added 0-59 countdown bezel option. When the chronograph timer is running and this bezel is selected, the bezel will automatically rotate to indicate the minute hand position corre