GlobalSync 2 - Worldtimer

GlobalSync 2 is the easiest to read and use worldtimer ever, providing capabilities not even available in conventional worldtimer watches that cost $thousands. Directly read the time in any of the principal 24 time zones, with no manual calculation, buttons to push or bezel to turn, and none of the text appears upside down. The displayed time is even adjusted for DST (daylight savings time) when applicable. # Features * Analog+digital Local time * DST adjusted time for all 24 principal time zones * Hour indications for 24 time zones indicate whether the zone is in the same day, previous day (red) or next day (blue) relative to your local time zone. Optionally the hour indications can indicate day/night. * Auto/Manual local time zone setting * Local time zone highlighted, also used to indicate AM/PM * Supports 30 and 45 minute UTC offset time zones * Supports UTC+13 and UTC+14 local time zones * Longitude marker (doubles as GPS status indicator: orange=last known position, green=usable or good signal) * Rotating datafield display (Date, UTC, current temperature, heart rate, resting heart rate, steps, active minutes) * Configurable hand color * Notifications, GPS signal strength, bluetooth, DST active and battery indicators * Burn-in protection in sleep mode for AMOLED displays. * Anti-aliased hands (if supported by watch model) * Battery saving mode * Goal progress bar graph * Selectable 12/24-hour or military format digital time For instructions on how to set the worldtime features: https://ko-fi.com/post/Setting-the-Worldtime-Features-on-GlobalSync-watch-O5O5O1VCP # PRO Version Features * Configurable face & hour marker colors * Automatic DST start/end changeover * Automatic local timezone selection using GPS position + internet geolocation API * Heading compass (12 o'clock position is north) * Option to display 2 data items in the upper display * Settable default data item for display in low power mode * 2nd goal progress bar graph * More selectable data items: ISO 8601 week and day number Local time zone name (Requires free ipgeolocation API key) Alternate time zone time Sunrise (SR) Sundown (SD) Time to next sun event (NSE) Latitude (LT) Longitude (LN) Daily low/high temperature Sea level barometric pressure (BA) Ambient pressure (AP) Windspeed (WS) Wind direction (WD) Probability of precipitation (POP) Relative humidity (RH) Distance (DI) Vigorous activity minutes (VAC) Total calories or kJ (TCAL or TKJ) Active calories or kJ (ACAL or AKJ) Floors climbed Messages Alarms Battery % Estimated remaining battery [hours] NOTE: Depending on hardware, not all watch models support all data items. # Payment For the PRO version, use this link to pay US$3.99 via Stripe (no account required; credit card, Apple Pay, Google Pay accepted). https://buy.stripe.com/9AQaGj9AgeVfdUYaJk Alternative payment via Paypal: https://www.paypal.com/paypalme/trudelta/3.99USD Important instructions to get your unlock code quickly: https://ko-fi.com/post/Payments-via-PayPal-Z8Z6AIK78 Payment via Stripe is recommended because you will get the unlock code immediately on the payment confirmation screen. Also sometimes with Paypal there are transaction fees depending on your country. With Stripe there are never any additional fees. If you don't get a reply within 8 hours, see here for help: https://ko-fi.com/post/Common-causes-for-not-receiving-your-unlock-code-N4N8BUEGH # Tags Dual time zone, multi-time zone, world time, worldtimer, world clock, daylight savings, world time

GlobalSync V3 is now available. See: https://apps.garmin.com/apps/39ff2afe-2432-44c3-8bc5-9dac9c604f4a Version 2.19.0 PRO Version only change: Added alternate time zone time to the data field selections Version 2.18.0 Updated for ipgeolocation.io changes. Version 2.17.0 Reduced battery consumption for models with larger memory. Corrected 12h format time display. Version 2.16.8 Added support for D2 Mach 2 and D2 Air X15. Version 2.16.7 Added support for Venu 4 models. Version 2.16.6 Added support for the Fenix 8 Pro. Version 2.16.5 Added support for Forerunner 570/970 models. Version 2.16.4 Added support for the Vivoactive 6. Version 2.16.3 Added support for the Descent G2. Version 2.16.2 Added support for Approach S50/S44. Version 2.16.1 Added support for Instinct 3 AMOLED models. Version 2.16.0 Added option to disable the second hand. Version 2.15.2 Added support for the Enduro 3 and Fenix 8 series. Version 2.15.1 Added missing support for the Enduro 2. Version 2.15.0 Changed AOD mode display for newer AMOLED display models (Connect IQ 5.0.0 or higher) to try to prevent flickering. Version 2.14.1 Added support for Forerunner 165 models. Version 2.14.0 Finally corrected crash occurring in some time zones. Corrected DST changeover times. Version 2.12.0, 2.13.0 Attempt to correct crash during initial loading and display on some devices. Version 2.11.1 Minor correction to settings text. Version 2.11.0 Corrected error in sea level air pressure readings. Version 2.10.0 Corrected crash on some models when reading GPS position. Version 2.9.0 Added support for the Descent Mk3 43mm models. PRO version only changes: Corrected missing compass indicator and crashes under certain conditions. Version 2.8.0 Added memory of last known GPS position for sunset/sunrise times, etc. PRO Version only change: Use barometric altimeter for altitude display value when an activity is not in progress. Version 2.7.1 Added support for Fenix 7X PRO Solar. Version 2.7.0 PRO version only change: Allowed for altitude to be displayed even if an activity is not in progress. Version 2.6.1 Added support for Vivoactive 5. Version 2.6.0 Added support for Venu 2 Square series. Version 2.5.0 Changed Cairo (Egypt) time zone to Athens (ATH), Eastern European time zone. Adjustment to your DST mode setting may be required. Version 2.2.3 Added support for 454x454 pixel display devices. Version 2.2.2 Added support for Venu 3S. Version 2.2.1 Prevented possible disappearing hour and minute hands. Minor revision to settings descriptions. Version 2.2.0 PRO version only change: Added option for semi-transparent hands (only for models with Connect IQ 4.0.0 or higher)