Endurance Pro - Trail Pacer

**EndurancePro** is a Connect IQ data field built for trail and ultra-trail running, for anyone who wants a pace that reflects real effort rather than raw ground speed. Instead of showing a "flat" pace that means little uphill or downhill, EndurancePro computes an **effort pace** corrected for elevation gain/loss, pack weight and — optionally — temperature. You finally know whether you're speeding up or slowing down relative to your actual effort, not just relative to flat ground. ### Key features - **Corrected effort pace** — two modes (Standard / Mountain) with adjustable climb and descent coefficients, tuned to your own running profile. - **Pace or speed, your choice** — switch between min/km and km/h; labels, target value, colorization and .FIT recording all adapt automatically, and you can set your target speed directly in km/h. - **VAM (vertical ascent speed)** — customizable zone display, with several display modes (VAM only, grade %, lap average, or alternating between all three). - **Weather correction** — a thermo-hygric factor adjusts your target pace based on temperature and humidity, so heat or cold doesn't catch you off guard. - **Combinable alarms** — VAM, pace and heart rate, with custom thresholds, vibration and/or sound feedback, and native watch toast notifications that stay out of the way of your data. - **Lap tracking** — current lap pace and average VAM, alternating with session averages. - **Configurable secondary metric** — fatigue, calories, effort distance, battery %, battery life remaining, Body Battery or thermal+pack correction, on two slots that alternate automatically. - **Remaining distance** — to the next waypoint or the end of the course, alternating automatically. - **Light and dark themes** — clear, high-contrast icons and readouts in both, for glare or low light. - **Enhanced .FIT recording** — effort pace/speed, VAM, coefficients and effort distance saved to the activity for later analysis in Garmin Connect. ### Configurable right on the watch — no phone needed Every setting (alarms, VAM zones, pace coefficients, pack weight, secondary metric, display options, HR zone, battery mode...) can be changed **directly from the watch**, organized into clear categories including a dedicated Display folder, with a long press on the Up button during an activity. Perfect for races or long outings in areas with no signal or Bluetooth. ### Available in 6 languages English, Français, Italiano, Español, Português, Deutsch. --- ## Suggested keywords trail, ultra-trail, VAM, elevation, effort pace, mountain, hiking, endurance, heart rate, alarm, data field --- ## Compatible devices epix 2 / epix 2 Pro, fēnix 7 (Pro/S/X variants), fēnix 8 Solar, fēnix E, Enduro 3, Forerunner 965, Venu 3 / 3S.

## [2.2.10] **New** - The alarm popup is back: choose between a full-screen popup drawn by the app (guaranteed 3/5/10s display, closes on its own, no button press needed) or the watch's native notification, from the watch menu. - Alarms (VAM / pace / heart rate) are now automatically silenced while a Garmin structured workout is running, since Garmin already handles its own step alerts. **Changed** - The "Alarm" setting now controls vibration, sound and the visual alert together (previously it only muted the visual popup, vibration/sound kept firing). - Climb/descent correction now uses direct meter equivalents (e.g. "100m of climb ≈ 1km flat") instead of an abstract multiplier — same default behavior, more intuitive to adjust from the watch. **Removed** - Removed the redundant session-level "pack weight" FIT field — already available at record and lap level. **Fixed** - Lap-level average pace/speed (Standard and Mountain) now correctly appear in Garmin Connect's lap table — they used to show as blank/"--" for every lap. - FIT field labels (effort pace, temperature correction, climb/descent coefficients, etc.) now display correctly in every supported language instead of falling back to English. - The on-watch settings menu is now fully translated — it used to show mostly blank labels in some languages. - The session-level temperature-correction FIT field now reads "ON"/"OFF" in Garmin Connect instead of "1"/"0". --- ## [2.2.8] **New** - Optional 1px outline around D+ or D- (whichever matches the current climb/descent direction) — toggle in the Colorization folder. - The "Circuit" setting is now a folder with independent on/off toggles for each lap-specific value (D+/D-, average pace, distance, timer) — the lap counter itself always stays visible as long as circuit tracking is on. **Changed** - 260x260 icon set refined with per-icon widths. --- ## [2.2.7] **New** - Ascent (D+) and descent (D-) are now tracked per lap, alongside distance, pace and VAM — visible during the lap-circuit display. **Changed** - Lap stopwatch now follows the Garmin timer instead of a wall clock, so it correctly freezes during a pause. **Fixed** - Lap counter no longer drifts out of sync after cancelling a lap. --- ## [2.2.6] **New** - New "Show clock" toggle in the Display menu — hide the clock time if you prefer not to see it. - Battery life remaining can now be shown to the left of the pace-mode icon, via a simple ON/OFF toggle. **Changed** - Settings menus now open with your current choice already highlighted, instead of always starting at the top of the list. - Lap counter is now hidden when lap-circuit mode is turned off. **Fixed** - Fixed the heart-rate zone ring visually overlapping the data values around it. --- ## [2.2.5] **New** - New option to calculate the pack-weight correction relative to your body weight instead of a flat percentage per kg, read from your Garmin profile. - New battery icon next to the battery bar. **Changed** - The Temp+Pack correction value no longer shows a "+" sign, since it's always positive. - Enduro 3 now uses its own dedicated, more precisely calibrated layout. **Fixed** - Fixed the temperature/humidity pace correction being applied in the wrong direction in some conditions, plus a small discontinuity at the edge of one of its temperature bands. --- ## [2.2.4] **New** - New independent visual modes (Off/Bar/Background/Font) for VAM colorization and for pace/speed colorization (instantaneous and average, set separately) — Font mode colors the value's text instead of drawing a bar/background. - New "Colorization" folder on the watch, grouping all zone-colorization settings (HR zone, VAM, pace/speed instantaneous and average) that used to be split across the Display folder. - New pace-mode indicator icon (Flat/Standard/Mountain) next to the clock, colored to match the active pace mode. **Changed** - The bottom clock separator is now a single straight line spanning the full width of the wat