Climb+

This data field shows the current elevation and total ascent in the same data field. If configured in a full width field it can also display both total ascent and current grade at the same time. If using a half-width field you can configure if you want the data field to display the value for total ascent or current grade along the current elevation or even alternate both every 5 seconds. In this case the total ascent value will be displayed in blue and the current grade in purple. You can also swap the current elevation and total ascent values to select the main one based on your preference. Lap support: when lap support option is enabled the total ascent value will be reset on every lap, or in workout mode when a workout step is completed, and you will visualize the current lap value. Additionally the current grade value smoothing can be configured to balance responsiveness and accuracy (higher smoothing = more accuracy, less responsiveness to quick grade changes). Indicators: [A], [G] or [T] (half-width fields only): indicates if the displayed value along the current one corresponds to the total ascent, current grade or if the values are alternating every 5 seconds in colors (avg = blue, max = purple). [S]: indicates that current elevation and total ascent values are swaped and total ascent will be the main value, displayed on the left half of the datafield. [L]: indicates that lap information is displayed instead of activity total. You can find all my apps here: https://apps.garmin.com/en-US/developer/aa709361-9b93-48f0-b4df-ace7894a754b/apps For full version history and further details please visit: https://www.fercasas.com/garmin-connect-iq/climb-plus/ Minimum Connect IQ version required 2.4.0.

All feedback is welcome and please don't hesitate to report any problems or translation issues using the Contact Developer link in the App Info tab, on the Additional Details section. Make sure you include your email address so I can reply to your message. Please note that all my applications are free as in free beer so you are not required to donate to use any of my apps. Donations to support my work will naturally still be much appreciated: https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=7W865UNMWYUR6 Version 1.51: Refresh for Edge 540/840 with firmware 20.19 or newer. Version 1.50: Added support for Edge 540/840. Version 1.40: Added support for Edge 1040. Version 1.31: Displayed values bug fix. Version 1.30: Added support for Edge 1030/1030 Plus. Added support to swap the current elevation and total ascent values through a datafield setting to allow users to select which value to be the main one. Added support to disable color highlighting through a datafield setting when the screen is in night mode. Added translations for german, dutch, french, italian and spanish. Code cleanup. Version 1.00: initial release supporting only Edge 520/520 Plus/530/820/830.