Blink

Blink delivers a clean interface with a big clock in the center and theme options. The area above the clock shows static information, the area below the clock shows rolling information which is done by showing each information for a certain amount of time. The static area contains directly above the clock a row with icons. The number above the icon indicates the status. Each status has a value from 0-9. E. g. the battery status of 6 means that the device has more than 60 % battery capacity. The next number shows the number of notifications (in maximum 9). The number as well as the icon vanishes if the phone is not connected (setting automatic). The next number shows the number of set alarms (also vanishes if no alarm is set on setting mode automatic). The next number shows the number of inactive quarters (inactivity alarm). This info also vanishes if no inactivity is reported (setting mode automatic). The vanishing shall keep the user interface clean. The most right number will show the current heart reate. The blinking area will contain three rows: the first one will hold icons which won't blink but are static. For example step icon, floors icon, calories icon and so on. The second row will contain an indicator below the icon which information is currently visible. The third row is flashing and will toggle through the information (steps, calories, floors, intensity minutes, distance, moon phase and sun events). The blinking can optionally been set in the watchface settings (note that the faster you flash the more power is needed). Below in the bottom line the min heartrate and the min average heart rate will be shown static. Furthermore there is an optional power saving mode: start blinking on a wrist turn and stop it after an adjustable amount of time. This ensures e. g. that blinking is off during sleep which saves power. During the blinking stop you can choose what the watch shall show. Introduced newly a super low power mode. After 1-2 hours after entering low power mode the watchface enters a super low power mode which shows only the clock. A wrist turn or unload the watchface will recover the watchface. If you like Blink you may consider supporting the developement either by making a review, doing some translation work or spending me a beer via this link:https://bit.ly/2A2nnlA Supporters will get a pin to unlock extra features. What's working: - clock - date - battery, notification, alarm, inactivity and heartrate information - steps, floors, calories, and intensity minutes with goal - blinking configuration - user can select whether a static info shall be always shown or not. Furthermore there is an automatic mode - user can select what to show in the blinking area - moon phase (a plus or minus shows whether the moon is increasing or decreasing. A percentage value indicates how full the moon is currently. The value is updates on hourly basis) - distance - min heartrates - sunset and sunrise - seconds indicator - coloring through user - color for icons if a special state is reached (already implemented: if activity goal is reached or battery is below 25 % or inactivity greater than 2 hours or moon around a moon event) - user can select to have a weekly or daily goal for intensity minutes - 12/24 hours - battery consumption (left blink field shows when battery was charged last time in days and how long battery will last in daysassuming the current average, right field shows average battery consumption per hour for this charge) What's shown in the static area: battery, notifications, alarms, inactivity, current heartrate (user can influence what to show via settings) in the bottom line: min heartrate and nin average heartrate (in the format "min HR:min average HR") What's shown in the blinking area: steps, floors, intensity minutes, calories, distance, sunevents, moonphase, battery consumption, countdown (not implemented yet) - user can select what to show

v0.3.9: support for FR945LTE, Descent mk2s, Support newest Connect IQ v0.3.8: Support for FR745, Descent MK2 and MARQ Golfer v0.3.7: Bug fixing v0.3.6: optimized F6X Po visualisation v0.3.5: added more watches, added 280x280 resolution like F6X Pro, prepared code for adding further display resolutions v0.3.0: show optional battery consumption in blink info v0.2.11: battery optimization, furthermore introduced super low power mode v0.2.10: set optionally high power mode minutes instead of heart rate v0.2.9: included new watches v0.2.8: introduced a pin v0.2.7: user can select a complementary theme to the background v0.2.6: included first themes v0.2.5: sunevent icon gets red one hour before the next sunevent, bugfixing v0.2.4: user can select whether the watch sows if three or four goals are reached in a row v0.2.3: refactored entire code basis (watchface's code size is 10 % smaller now), user can set a battery level (above that level the battery icon is hidden) v0.2.0-v0.2.2: Bugfixing v0.1.9: moon can be colored if moon state is reached v0.1.8: clock shows 24/12 hours format depending on your watch's settings v0.1.7: introduced special state for inactivity (two hours inactivity), user can select whether he wants a weekly or daily intensity minutes goal v0.1.6: introduced a color for icons if a special state is reached (already implemented: if activity goal is reached or battery is below 25 %) v0.1.5: introduced a power saving mode: blinking starts on wrist turn and stops after a configurable amount of time v0.1.4: included coloring v0.1.3: included a seconds indicator v0.1.2: included sunrise and sunset v0.1.1: included min heart rate and min average heartrate (give it some to learn) v0.1.0: changed blink concept, battery optimization, included distance and moon phase, user can now select the blink inclusion v0.0.9: Bugfixing v0.0.8: user can select which activity is shown. Battery optimizations. Icon position of the static info is optimized v0.0.7: user can select which static info is shown v0.0.6: user can adjust flash frequency v0.0.5: user can select 7 or 14 segment font for date string (14 is the default now to ease weekday reading)