FB Diver Chrono
· v0.7.0
About
For all chronograph enthusiasts, myself included
# Features
* Analog time
* 3 subdial layout
* Left sub-dial configurable to:
Heart rate as % of maximum
Heart rate [bpm]
Battery %
Today's step progress to goal %
Today's activity minutes progress to goal %
This week's activity minutes progress to goal %
Current temperature
* Date window
* Configurable hand color
* Outer arc can be set to be a move indicator, battery%, heart rate, heart rate as % of max, goal progress, body battery or stress indicator
* Battery saving mode during sleeping hours
* Anti-aliased graphics (if supported by watch model)
* 64k color support for AMOLED displays
* Burn-in safe, full screen, always on display for AMOLED displays
* Option to hide subdials or show only in high power mode
NOTE: When the sub-dial reads 0% or a very small value, a black circle appears in the center of the dial hand (like a zero). This is to distinguish it from a 100% reading.
# PRO Version features
* Configurable face, daytime lume, second hand & arc graph color
* All subdials can be configurable
* Additional selections for subdials:
Today's active calories burned progress to goal %
Distance run/walked
Floors climbed
Meters (or feet) climbed
METs (Metabolic Equivalent of Task) (during an activity)
MET·hrs today
MET·hrs/week
Recovery time (hours)
Body battery
Stress level
Feels like temperature
Probability of precipitation
Sea level barometric pressure [kPa]
Altitude
2nd time zone or UTC time
Internal temperature
NOTE: Not all selections are available on all watch models depending on hardware support
* Directional heading compass indicator (when a GPS signal is available)
* Configurable subdial pointer color
* Subdials can be turned off, on or on only in high power mode
* 12 o'clock marker can be used to as a bluetooth, GPS signal, messages, low battery or PM indicator
* Sunrise and sunset time markers on the dial
* Night lume mode with selectable activation mode and color
* Chronograph reset emulation: (shows second hand in 0 position in low power mode)
* Custom brand text instead of logo
* Semi-transparent hand center option (for devices with Connect IQ 4.0.0 higher system software)
* Always on second hand option (for Forerunner 255 and 955 series, Legacy Saga and Legacy Hero series, Vivoactive 4/4S, Approach S62 and Fenix 7/7S/7X models only)
* Bonus: replica mode
# Payment
For the PRO version, use this link to pay US$2.99 via Stripe (no account required; credit card, Apple Pay, Google Pay accepted). https://buy.stripe.com/eVa3dR5k07sN7wAbNi
Alternative payment via Paypal: https://www.paypal.com/paypalme/trudelta/2.99USD
Important instructions to get your unlock code quickly: https://ko-fi.com/post/Payments-via-PayPal-Z8Z6AIK78
If you don't get a reply within 8 hours, see here for help:
https://ko-fi.com/post/Common-causes-for-not-receiving-your-unlock-code-N4N8BUEGH
# Tags
Chronometer, chronograph, analog, diver, panda
What's new
For the version of this watchface with an outer bezel, see the Multi-Bezel Diver watchface.
Version 0.7.0
Reduced battery consumption.
Version 0.6.0
Reduced battery consumption and improved robustness.
Version 0.5.0
Changed AOD mode display for newer AMOLED display models (Connect IQ 5.0.0 or higher) to try to prevent flickering.
Version 0.4.0
PRO version only change: Revised the MET-h/wk and MET-h today calculation.
Version 0.3.10
Added support for Forerunner 165 models.
Version 0.3.9
Added support for the Descent Mk3 43mm models.
Version 0.3.8
Added support for the Fenix 7 Pro Solar.
Version 0.3.7
Added support for the Descent Mk3 model.
Version 0.3.6
Added support for the Fenix 7X Pro Solar.
Version 0.3.5
Added olive green to color selections.
Version 0.3.4
Added dark tan to color selections.
Version 0.3.3
Added support for the Vivoactive 5.
Version 0.3.2
Added support for Venu 3 device models.
Version 0.3.1
Added support for more device models.
Version 0.3.0
Reduced battery consumption. Fixed graphics of hand center when the second hand was not shown.