smartLAB scale APP

With the smartLAB scale App you can collect measured values of your smartLAB Smart scale on your Garmin Fitness Tracker and transfer these to your Garmin Connect IQ App. To transfer the data to your Garmin Connect IQ it is required to install the fitmefit move App/ fitmeit scale App on your mobile device, where the Garmin Connect IQ App is installed. Additionally you need to install the smartLAB scale App on your Garmin Fitness Tracker. With the smartLAB scale App up to 50 measurements can be saved and displayed in the App on your Garmin Fitness Tracker. Before measurement: - Connect your Garmin Fitness Tracker with the Garmin Connect IQ App - Connect the fitmefit move App / fitmefit scale App to your Garmin Connect IQ, by entering your data in system links Performing a measurement and transmission: - Start the scale smartLAB app on your Garmin Fitness Tracker and perform a measurement with your smartLAB scale. The data are stored on your Garmin Fitness Tracker and can be transferred at a later date. - To transfer the measured data to your mobile device, start the smartLAB scale App and fitmefit move App / fitmefit scale App. The transmission will work automatically when both Apps are started - After the fitmefit App has received the data, these are automatically forwarded to your Garmin Connect IQ Important: This complicated way of data transfer had to be chosen as a direct transfer from the smartLAB scale to Garmin Connect IQ is not supported by Garmin. Note: The smartLAB scale App is compatible with all Garmin fitness trackers that support Garmin Connect IQ. Note: The smartLAB scale App can only receive current measured data. Stored values on the smartLAB scale cannot be accessed via the Garmin Fitness Tracker, as this is not supported.