Semaphore 2

This is an upgrade of the Semaphore watchface with on watch chronograph start/stop functionality. For all the sailors and wannabe sailing adventurers... # Features * Analog time * 3 subdial layout * Left sub-dial configurable to: Heart rate as % of maximum Battery % Today's step progress to goal % Today's activity minutes progress to goal % This week's activity minutes progress to goal % Current temperature * Date window * Outer arc graph can be set to be a move indicator, battery%, heart rate as % of max or goal progress indicator * Configurable outer arc color * Optionally obtain weather from OpenWeatherMap (requires free API key from https://openweathermap.org/ ) * Battery saving mode * Anti-aliased graphics (if supported by watch model) * Burn-in safe, full screen, always on display for AMOLED displays * Full 64k color support AMOLED display models (Except for Venu Square model without music) NOTE: When the sub-dial reads 0% or a very small value, a black circle appears in the center of the dial hand (like a zero). This is to distinguish it from a 100% reading. # PRO Version features * Selectable face color: black, blue * Configurable hand color * All subdials can be configurable * Additional selections for subdials: Today's active calories burned progress to goal % Distance run/walked Floors climbed Recovery time (hours) Body battery Stress level Feels like temperature Probability of precipitation Sea level barometric pressure [kPa] Windspeed (with selectable units) Wind direction Tide level and tide level range (estimated) - requires free API key from https://stormglass.io/ Speed (with selectable units) Altitude 2nd time zone or UTC time NOTE: Not all selections are available on all watch models depending on hardware support NOTE: Tide level information is not to be used for navigation. Units are in meters or feet (depending on your watch "elevation units" setting). (datum selectable between MSL and MLLW; The display will only update 5-10 minutes after this setting is changed.) * Option to hide subdials or only display in high power mode * Semaphores (flags) can be set to indicate system status, activity goal achievement status or weather forecast: A - Alarm(s) set B - Battery OK (greater than 10%) (off or flashing when less than 10％) C - Communication (Bluetooth) established D - Daily activity minutes goal reached F - Floors climbed goal reached G - GPS signal OK K - Daily active kCal goal reached L - Last known good GPS position in use M - Weekly activity Minutes goal reached N - Notification(s) present P - PM R - Rain or snow in today's forecast S - Daily Steps goal reached U - (Up) Tide is rising (only valid if tide level is displayed on the center subdial) V - Move OK (Off indicates time to move!) W - Clear or fair weather today * Chronograph (count up timer function) (control via watchface settings menu and press and hold on the touchscreen) * Directional heading compass indicator (when a GPS signal is available) * Bonus: replica mode * Night lume mode with selectable color * Customizable brand name text # Payment For the PRO version, use this link to pay €3.00 via Stripe (no account required; credit card, Apple Pay, Google Pay accepted). https://buy.stripe.com/28E4gA17a3C218z76Cf3c2i Alternative payment via Paypal: https://www.paypal.com/paypalme/trudelta/3.00EUR Important instructions to get your unlock code quickly: https://ko-fi.com/post/Payments-via-PayPal-Z8Z6AIK78 Payment via Stripe is recommended because you will get the unlock code immediately on the payment confirmation screen. Also sometimes with Paypal there are transaction fees depending on your country. With Stripe there are never any additional fees. If you don't get a reply within 8 hours, see here for help: https://ko-fi.com/post/Common-causes-for-not-receiving-your-unlock-code-N4N8BUEGH

Version 2.6.7 Added support for the Forerunner 70 and 170 models. Version 2.6.6 Added support for the D2 Mach 2 Pro. Version 2.6.5 Added support for the D2 Mach 2 and D2 Air X15. Version 2.6.4 Added support for Venu 4 models. Version 2.6.3 Added support for the Fenix 8 Pro. Version 2.6.2 Added support Forerunner 570/970 models. Version 2.6.1 Added support for the Vivoactive 6. Version 2.6.0 PRO Version only change: Added the ability to start, stop and reset the chronograph using a press and hold action on the touchscreen. The chronograph must be displayed on the subdials or the main dial for this feature. For supported Garmin models, see: https://ko-fi.com/post/Garmin-Models-with-Press-and-Hold-Input-Capability-B0B01C98HA Version 2.5.3 Added support for the Descent G2 model. Version 2.5.2 Added support for Approach S50/S44 models. Version 2.5.1 Added support for Instinct 3 AMOLED models. Version 2.5.0 Reduced battery consumption and improved robustness. Version 2.4.2 Added support for the Enduro 3 and Fenix 8 series. Version 2.4.1 Added missing support for the Enduro 2. Version 2.3.0 Changed AOD mode display for newer AMOLED display models (Connect IQ 5.0.0 or higher) to try to prevent flickering. Version 2.2.0 OpenWeatherMap API change. Version 2.1.0 PRO Version only change: Added triangle to the left of the bottom subdial to indicate tide rising/falling when tide level is displayed. Version 2.0.0 PRO Version only change: Added chronograph (count up timer) function with on-screen start/stop/reset control. The chronograph can be shown on the subdials or main dial. For details, see: https://ko-fi.com/Post/On-Watch-Chonometer-Control-W7W7SGQFB For existing Semaphore PRO version users. Please contact me for a free upgrade.