Nighthawk Chrono

For all chronograph enthusiasts, myself included # Features * Analog time * 3 subdial layout * Left sub-dial configurable to: Heart rate as % of maximum Heart rate [bpm] Battery % Today's step progress to goal % Today's activity minutes progress to goal % This week's activity minutes progress to goal % Current temperature * Date window * Configurable hand color * Outer arc can be set to be a move indicator, battery%, heart rate, heart rate as % of max, goal progress, body battery or stress indicator * Battery saving mode during sleeping hours * Anti-aliased graphics (if supported by watch model) * 64k color support for AMOLED displays * Burn-in safe, full screen, always on display for AMOLED displays * Option to hide subdials or show only in high power mode NOTE: When the sub-dial reads 0% or a very small value, a black circle appears in the center of the dial hand (like a zero). This is to distinguish it from a 100% reading. # PRO Version features * Configurable hour marker & arc graph color * All subdials can be configurable * Additional selections for subdials: Today's active calories burned progress to goal % Distance run/walked Floors climbed Meters (or feet) climbed METs (Metabolic Equivalent of Task) (during an activity) MET·hrs today MET·hrs/week Recovery time (hours) Body battery Stress level Feels like temperature Probability of precipitation Sea level barometric pressure [kPa] Altitude 2nd time zone or UTC time Internal temperature NOTE: Not all selections are available on all watch models depending on hardware support * Directional heading compass indicator (when a GPS signal is available) * Sunrise and sunset time markers on the dial * Night lume mode with selectable activation mode and color * Always on second hand option (for Forerunner 255 and 955 series, Vivoactive 4/4S, Legacy Hero & Legacy Saga series, and Fenix 7/7S/7X models only) * Subdials can be hidden in night lume mode * Chronograph reset emulation: (shows second hand in 0 position in low power mode) * Custom brand text instead of logo * Bonus: replica mode # Payment For the PRO version, use this link to pay US$2.99 via Stripe (no account required; credit card, Apple Pay, Google Pay accepted). https://buy.stripe.com/6oE6q35k0bJ34ko5mP Alternative payment via Paypal: https://www.paypal.com/paypalme/trudelta/2.99USD Important instructions to get your unlock code quickly: https://ko-fi.com/post/Payments-via-PayPal-Z8Z6AIK78 Payment via Stripe is recommended because you will get the unlock code immediately on the payment confirmation screen. Also sometimes with Paypal there are transaction fees depending on your country. With Stripe there are never any additional fees. If you don't get a reply within 8 hours, see here for help: https://ko-fi.com/post/Common-causes-for-not-receiving-your-unlock-code-N4N8BUEGH # Tags Chronometer, aviator, chronograph, analog, panda, pilot

Version 0.17.0 Reduced battery consumption. Version 0.16.0 Reduced battery consumption and improved robustness. Version 0.15.0 Corrected AOD display graphics for 454x454 pixel display models. Version 0.14.0 Corrected crash on some models when entering AOD mode. Version 0.13.0 Changed AOD mode display for newer AMOLED display models (Connect IQ 5.0.0 or higher) to try to prevent flickering. Version 0.12.0 PRO version only change: Revised the MET-h/wk and MET-h today calculation. Version 0.11.9 Added support for the Descent Mk3 43mm models. Version 0.11.8 Added support for Fenix 7 PRO Solar. Version 0.11.7 Added support for the Descent Mk3 model. Version 0.11.6 Added support for Fenix 7X PRO Solar. Version 0.11.5 Added support for Vivoactive 5. Version 0.11.4 Added support for Venu 3 models. Version 0.11.3 Added support for Epix PRO and Fenix 7 PRO models. Version 0.11.2 Added support for Approach S70 series. Version 0.11.1 Added Portuguese translation. Version 0.11.0 PRO version only changes: Corrected display when always on seconds is enabled and battery save during sleep was active. Version 0.10.0 Corrected overlap of date digits on some displays. Workaround for Garmin SDK problem which caused Body battery and Stress to not be displayed on some devices. Recompiled using SDK 4.1.7 except for Forerunner 265 and 965 series. Version 0.9.2 Added support for Forerunner 965 series. Version 0.9.1 Added support for Forerunner 265 series. Version 0.9.0 PRO Version change: Added ability to set a custom brand name. Version 0.8.0 Changed elevation and height climbed display to follow elevation units setting on the watch rather than the distance units setting. Version 0.7.0 PRO version only change: Changed length of accent color tip of second hand in always on seconds mode. Version 0.6.0 PRO version only change: Correct problems with second hand stopping in always on seconds mode. Version 0.5.0 Changed the burn-in protection screen on AMOLED devices to turn on fewer pixels to try to prevent the screen from shutting completely off. PRO version only change: Added separate color setting for the outer arc. Version 0.4.0 Corrected second hand graphics on 218x218 pixel screens. Changed default hand color to dark grey for better differentiation from second hand on 64 color displays. Corrected crash on Approach S62. PRO Version only change: Performance optimization for always on seconds feature. Version 0.3.0 Performance optimizations. PRO Version only change: Corrected always on seconds display. Version 0.2.0 Corrected burn-in protection display on AMOLED devices. PRO version only change: Changed setting to hide subdials to be more flexible. Expanded support for this feature to all watch models. Version 0.1.0 Changed right subdial ticks to use accent color where applicable. PRO version only change: Added always on seconds option for watch models with sufficient memory. Version 0.0.9 Added support for Venu Square 2 series. Version 0.0.8 Added support for Venu 2S, Forerunner 55 and Fenix 5X. Version 0.0.6 Added support for 240x240, 260x260 and 280x280 pixel display devices.