Semaphore

For all the sailors and wannabe sailing adventurers... # Features * Analog time * 3 subdial layout * Left sub-dial configurable to: Heart rate as % of maximum Battery % Today's step progress to goal % Today's activity minutes progress to goal % This week's activity minutes progress to goal % Current temperature * Date window * Outer arc graph can be set to be a move indicator, battery%, heart rate as % of max or goal progress indicator * Configurable outer arc color * Optionally obtain weather from OpenWeatherMap (requires free API key from https://openweathermap.org/ ) * Battery saving mode * Anti-aliased graphics (if supported by watch model) * Burn-in safe, full screen, always on display for AMOLED displays * Full 64k color support AMOLED display models (Except for Venu Square model without music) NOTE: When the sub-dial reads 0% or a very small value, a black circle appears in the center of the dial hand (like a zero). This is to distinguish it from a 100% reading. # PRO Version features * Selectable face color: black, blue * Configurable hand color * All subdials can be configurable * Additional selections for subdials: Today's active calories burned progress to goal % Distance run/walked Floors climbed Recovery time (hours) Body battery Stress level Feels like temperature Probability of precipitation Sea level barometric pressure [kPa] Windspeed (with selectable units) Wind direction Tide level and tide level range (estimated) - requires free API key from https://stormglass.io/ Speed (with selectable units) Altitude 2nd time zone or UTC time NOTE: Not all selections are available on all watch models depending on hardware support NOTE: Tide level information is not to be used for navigation. Units are in meters or feet (depending on your watch "elevation units" setting). (datum selectable between MSL and MLLW; The display will only update 5-10 minutes after this setting is changed.) * Option to hide subdials or only display in high power mode * Semaphores (flags) can be set to indicate system status, activity goal achievement status or weather forecast: A - Alarm(s) set B - Battery OK (greater than 10%) (off or flashing when less than 10％) C - Communication (Bluetooth) established D - Daily activity minutes goal reached F - Floors climbed goal reached G - GPS signal OK K - Daily active kCal goal reached L - Last known good GPS position in use M - Weekly activity Minutes goal reached N - Notification(s) present P - PM R - Rain or snow in today's forecast S - Daily Steps goal reached U - (Up) Tide is rising (only valid if tide level is displayed on the center subdial) V - Move OK (Off indicates time to move!) W - Clear or fair weather today * Directional heading compass indicator (when a GPS signal is available) * Bonus: replica mode * Night lume mode with selectable color * Customizable brand name text # Payment For the PRO version, use this link to pay US$3.00 via Stripe (no account required; credit card, Apple Pay, Google Pay accepted). https://buy.stripe.com/bIY29N6o4dRb8AE3ct Alternative payment via Paypal: https://www.paypal.com/paypalme/trudelta/3.00USD Important instructions to get your unlock code quickly: https://ko-fi.com/post/Payments-via-PayPal-Z8Z6AIK78 Payment via Stripe is recommended because you will get the unlock code immediately on the payment confirmation screen. Also sometimes with Paypal there are transaction fees depending on your country. With Stripe there are never any additional fees. If you don't get a reply within 8 hours, see here for help: https://ko-fi.com/post/Common-causes-for-not-receiving-your-unlock-code-N4N8BUEGH # Tags Chronograph, chronometer, sports chronograph, marine, sailing, analog

Version 1.26.0 Reduced battery consumption and improved robustness. Version 1.25.0 Changed AOD mode display for newer AMOLED display models (Connect IQ 5.0.0 or higher) to try to prevent flickering. Version 1.24.0 PRO Version only change: Corrected crash when body battery or stress was selected for display. Version 1.23.0 OpenWeatherMap API change. Corrected high power mode display for AMOLED devices. Version 1.22.0 OpenWeatherMap API change. Version 1.21.0 Corrected crash on Fenix 6 PRO after changing subdial show/hide setting. Version 1.20.1 Added support for Forerunner 165 models. Version 1.20..0 PRO version only change: Corrected subdial label wind direction. Version 1.19..9 PRO version only change: Corrected description for the wind direction data selection. Version 1.19.8 Added support for the Descent Mk3 43mm models. Version 1.19.7 Added support for Fenix 7 Pro Solar. Version 1.19.6 Added support for the Descent Mk3 model. Version 1.19.5 Added support for Fenix 7X Pro Solar. Version 1.19.4 Added support for Vivoactive 5. Version 1.19.3 Added support for Venu 3 models. Version 1.19.2 Added support for Epix 2 PRO and Fenix 7 PRO models. Version 1.19.1 Added support for Approach S70 series. Version 1.19.0 PRO Version only change: Added ability to select most other PRO version data items for the left subdial. Version 1.18.4 Added support for Forerunner 965 series. Version 1.18.3 Added support for Forerunner 265 series. Version 1.18.2 Reduced memory footprint for all devices. Reduced run-time memory use for Fenix 6. Version 1.18.1 Added support for Marq 2 series. Version 1.18.0 Added support for Venu Square 2 series. Version 1.17.2, 1.17.1, 1.17.0 Corrected crash when saving settings on Connect IQ 4.0.0 devices. Version 1.16.0 PRO Version only change: Corrected crash when attempting to read tide level data for some locations. Version 1.15.0 Added capability to read weather info from OpenWeatherMap. PRO Version only change: Made update of tide level indicator update faster after switching between MSL and MLLW datum settings. The setting change should reflect on the subdial in 5-10 minutes. Version 1.14.1 Corrected subdial scale number labels when scale maximum is 1 or lower. Version 1.14.0 PRO version change only: The latitude and longitude position will be remembered to be used in case the watchface is exited and restarted so that a new location acquisition is not required. Version 1.13.1 PRO version change only: Corrected problem where the tide level and/or tide level range would not be correct or not displayed after 23 hours due to the maximum API requests being reached. Version 1.12.0 PRO version change only: Tide chart data will be re-requested from the Stormglass API if your latitude/longitude position changes significantly. Allowed selection of tide level reference datam between MSL and MLLW. Added display of tide direction using the "U" semaphore (semaphore will be ON when tide is rising, off when tide is falling). Improved accuracy of indicated tide level. Corrected the arc around the tide level dislay subdial to span the low to high tide level only for the next low tide and high tide. Version 1.11.1 PRO version change only: Changed units selection for altitude and tide level to follow the "elevation units" setting on your watch. Corrected tide level range arc from being erroneously displayed in night lume mode. Version 1.11.0 Added estimated tide level and tide level range selection to center subdial (Not to be used for navigation). This requires a free API key from https://stormglass.io/ Version 1.10.3 Added support for Forerunner 255 and Forerunner 955 series models. Version 1.10.2 Expanded language support. Version 1.10.1 Added support for D2 Mach 1. Version 1.10.0 PRO version changes: Added display options for recovery time, body battery and stress level (for watch models which support these functions)